So you've seen Shonen Jump and Marvel at They've inspired you to want to create your own hand-drawn comic. But being the clueless person you are, you have no idea what you're doing and give up within the first stroke of a pencil. Well, I'm here to help you out with this little tutorial of mine. In the midst of this endeavor, you'll also get to see firsthand how I created one of the pages of my new series from its earliest moments of conception to the finished product. Yes, this is sorta like advertising, but I'm doing it to help you out, so pay attention!
[center]=*=[/center]
1. Screw In A Light Bulb
So, what's the first thing you need to create a comic aside from some type of artistic talent, hired or otherwise? Duh, an idea. Whether you're planning a series or a one-off, every piece of artistic material in existence had to start with a simple little idea. If you have trouble at this step, sorry about that. There's little you can do to cause great ideas to spring forth whenever you want; Inspiration is just too important to work on your time. But you can always work to speed up the process:
Look at other material for ideas, such as your favorite books, movies, or TV shows (Don't mistake this for taking concepts directly; use other material as a springboard for your own concepts). Recall funny or interesting events that you've experienced, or ask your friends for their input. While I use all three of the prior methods, I usually tend to write my mental fluff down in Notepad using a cheap knock-off of the writing process: I make a general outline of the situation, plan the actions, throw in some speech, and refine it until I get a good series of events and the perfect accompanying dialogue and onomatopoeia.
But whatever your method, your brainstorming in the end must leave you with a solid, workable idea that will be easily translatable into comic form.
More Personal Advice: When doing a funny comic or situation, remember... [ul]
[li]... To keep your dialogue as brief and understood as possible. Shakespeare himself said that "Brevity is the soul of wit". In other words, the shorter the joke or punch line is, the more maximized its humor will be. Long monologues could prove to confuse the reader or make it harder on you to keep the focus on taking the reader straight to the punch line and on the floor laughing. (
Further reading on the rules of a joke.)
[li]... That frustration is your friend. Characters usually prove to be at their funniest when they are constantly inhibited yet ironically determined to bypass their obstacles (Daffy Duck, Wile E. Coyote, Tom and Jerry, etc.). It also offers a sense of empathy to the character, making us feel sorry for them and thus continually interested in chronicling their endeavors. Exploit constant failure and frustration whenever and wherever you can!
[li]
That the easiest way to determine if your own jokes are funny is to see if they make you laugh. We all retell jokes weve heard just because of how much of a gut-buster they were, and the same goes for your own material. I've laughed or at least had a goofy smile on my face when I've drawn a funny comic or revisited one, and sure enough those same comics have provoked the best response in my readers. So, if it doesn't make you laugh in the least bit, chances are the joke isn't so hot.[/li][/ul]
[center]=*=[/center]
2. Like A Glove
Now that you've got your idea, it's time to start the drawing, or at least sketching. Yes, there is more to actually drawing the comic than just throwing down some images in boxes (panels) and being done with it... well, if you actually care. You need to know how the idea will best be presented in imagery, how to pace certain actions and scenes, and how to lead the person's eyes accordingly. Here's some general observations and techniques I use when deciding my own panel arrangements

ul]
[li]Basic Situation: The congruent, aligned panel placement; very common. For me, this arrangement is reserved for general situations and basic narratives; those that lack a lot of action. Detail can be as rampant as one wants it to be as this is the time to make the reader really focus. As a result, it can also be great for ironic conclusions.
[li]Quick/Rapid Movement: When showcasing a quick action or idea that uses multiple steps, I tend to use a smaller set of panels that are situated close together in a row or column. Small panels give focus to the action while leaving little room for detail to take a person's eyes off of the situation at hand. Their close placement leads a reader swiftly from the action's initiation to its conclusion.
[li]Introductions/Revelations: When a comic starts, a new character or object is introduced, or something is revealed, you can use a panel that is much larger than the others or even a panel that is not bound by lines at all (no box). A panel that takes up a lot of space or a scene taking place outside of any boundaries naturally draws a lot of attention to itself and thus gives itself prime importance.[/li][/ul] Remember, think about the entirety of your idea when deciding on the type of panels to showcase it. What exactly is going on in the situation? Is your comic slow or fast-paced? How much dialogue is there? Is there something big about to be revealed?
Once you have an idea on how all of this will work, you can sketch a tiny panel arrangement that will serve as the framework for your whole comic. On another sheet of paper or to the side of the panels, crudely sketch out the actual imagery with the speech balloons and dialogue! This will help you determine the space youll need and help you to make the necessary adjustments to avoid diving into the final copy unarmed. Here's an example of a general outline for my comic:
[center]
![[Image: tutorialsketches.png]](http://i65.photobucket.com/albums/h225/BlizShadow1/tutorialsketches.png)
[/center]
Yes, har har har, you can laugh at my horrible sketching. Cmon, get it out. We have more work to do. XP
[center]=*=[/center]
3.To The Drawing Board!
Idea? Check. Outline? Check. Now, we can finally get to the drawing. No diversions this time. First things first: pencil in your panels. You can sketch them out roughly since the whole thing will just be going into the computer where you can add perfectly straight lines automatically, but if you want to, you can finalize the panels right now with whatever tool you want to use. My surprising tool of choice for this step?
Graphing paper!
If youre picky like me, youll notice that a ruler depends solely on if you have it straight across the page which can be hard to determine sometimes, so even using one of those can produce underwhelming results. With the straight lines of graphing paper, all you have to do is line the paper up to a line and trace the lines as you see fit. Also, because each block on graphing paper is congruent to one another, you dont have to really measure to space your panels evenly! Just count a set number of blocks between each panel and draw!
![[Image: tutorialexample.png]](http://i65.photobucket.com/albums/h225/BlizShadow1/tutorialexample.png)
Now after your panels are down, add the images. You can go outside the paneling borders as much as you want since the penciling will be done away with later. But just make sure you have as much space as possible for your lettering and speech bubbles. Also, take care to keep your sketching is as light as possible. The lighter it is, the easier it will be for your pen to actually spill the ink over the graphite. Example:
[center]
![[Image: page3tutorial.png]](http://i65.photobucket.com/albums/h225/BlizShadow1/page3tutorial.png)
[/center]
Now, onto the inking, arguably the most tedious part of this stage. I dont use any of those fancy inks or professional pens here; only a regular ball-point pen, preferably a new one. The older the pen, the more stubborn itll be when you trace over the graphite which can result in large splotches or messy areas. When I ink, I go back over the lines as neatly as I can while avoiding stops in the middle of a line. All of the lines are as thin as possible, the key to my inking style:
[center]
![[Image: page3inkedtutorial.png]](http://i65.photobucket.com/albums/h225/BlizShadow1/page3inkedtutorial.png)
[/center]
Next, Ill go back through and add thickness to some of the lines. Sorry to say that theres no real technique to this: whichever lines you think would look good a little thicker than others are the ones you simply ink in. If a similar figure reoccurs in multiple panels, such as a character or background object, the corresponding lines dont even have to same thickness. Just go wild:
[center]
![[Image: page3betterinked.png]](http://i65.photobucket.com/albums/h225/BlizShadow1/page3betterinked.png)
[/center]
Once youve added any missing details, inked the whole page and have allowed it to dry, erase the pencil lines as best you can, and youll end up with something fabulous:
[center]
![[Image: MansionComic3resizedagain.png]](http://i65.photobucket.com/albums/h225/BlizShadow1/MansionComic3resizedagain.png)
[/center]
[center]=*=[/center]
4. Going Digital
So, youve drawn the page. Yet after awhile, you start noticing that even though you were as careful as da Vinci was when he crafted the Mona Lisa, your lines may look a little off, messy, or simply not dark enough. What would have been a Renaissance painters nightmare is our chance to have some fun because were going into the computer.
First, scan the picture using the highest quality setting your spy ware-infected system can possibly manage. Next, youll have to resize it for decent viewing. I get this over with easily in Paint. Open up the picture in the program, go to Image > Resize/Skew. Shrink it down to a reasonable size (I usually do anywhere from 20-30 for both dimensions; depends on how it looks because I dont use a set size for each page. Hey, Im not that much of a perfectionist). With your picture set on a high quality, this method actually shouldnt detract too much from quality when you shrink it.
Now, save these settings and then open it up in whatever major graphics program you use (Note that Im using it in Photoshop Elements v.4). First, were going to fix up those lines. To darken them even more and get rid of the graphite smudging and dirt, go to Layer > New Adjustment Layer > Levels. If it asks you to hit OK, do so. You should get a window with a set of three small sliders colored black, white, and gray:
[center]
![[Image: PS1.png]](http://i65.photobucket.com/albums/h225/BlizShadow1/PS1.png)
[/center]
Move the sliders around until you get the desired result. Then afterwards, merge the adjustment layer down onto the background (Right click on adjustment layer > Merge Down):
[center]
![[Image: PS2.png]](http://i65.photobucket.com/albums/h225/BlizShadow1/PS2.png)
[/center]
While this will clean up your image somewhat, you may still need to go through and manually neaten the lines or get rid of some of the annoying dark spots that surpassed the level editor using the eraser and brush tool. If you were careful during inking, this step shouldn't be as tedious as it sounds. And your editing doesnt have to look entirely professional, either. Perfectly straight and curved lines while give the art a more mechanical look that will take away from the traditional, hand-drawn look that were going for:
[center]
![[Image: PS3.png]](http://i65.photobucket.com/albums/h225/BlizShadow1/PS3.png)
[/center]
![[Image: comparison-1.png]](http://i65.photobucket.com/albums/h225/BlizShadow1/comparison-1.png)
Now that our imagery is where we want it to be, we need to fix up those borders. This will be easy-peasy. Take your brush tool, line it up as best you can, and hold down Shift. The lines will automatically straighten themselves as you trace your tablet/mouse across the page. Do this for all of the lines:
[center]
![[Image: PS4.png]](http://i65.photobucket.com/albums/h225/BlizShadow1/PS4.png)
[/center]
If your lines over lap the images or each other like its doing here, dont fret. Just cut the unnecessary drivel away but using the marquee tool (M key). Select all of the stuff outside of your borders and delete by hitting Ctrl + X. If you need to connect the lines of the images to the borders or edit the comic more, do so:
[center]
![[Image: PS5.png]](http://i65.photobucket.com/albums/h225/BlizShadow1/PS5.png)
[/center]
Now time to insert the dialogue. Theres little to explain here. I just write it out myself in keeping with the art theme of obvious traditional work and only use set fonts for onomatopoeia, but if you want to use an actual font for all of the lettering, go right ahead. The problem with this, however, is that the Text tool makes you write in a square border while youre more than likely going to have circular speech balloons, and itll look very weird as a result. You can probably handle this by manually moving the words yourself to fit the curvature of the balloon better or by using some awesome Photoshop trick that Im not yet aware of, but however you feel best doing the dialogue, do it:
[center]
![[Image: PS6.png]](http://i65.photobucket.com/albums/h225/BlizShadow1/PS6.png)
[/center]
If you want to add any finishing touches, such as tones to different areas or frames, or even color your comic, you can. The easiest way to do this is to duplicate the background layer by right clicking on it. Afterwards, in the layer window, go to Layers > Darken. This will allow you to color under the line art to your hearts content.
However, if youre satisfied with how it looks now
. Then congratulations! Youve made your very own hand-drawn comic! How do you feel? Youd better feel accomplished, because I didnt do all of this for my health, ya lazies. XP;; I truly hope that this has proven helpful to you in any way. If youve got any extra questions or comments about this tutorial or even any tips of your own, dont hesitate to let me know.
Now, fly away and be better artists!